| SIMATIC DP, POWER SUPPLY MODULE FOR ET200IS |
|
Supply voltage |
24 V DC | Yes |
Reverse polarity protection | Yes |
Mains buffering |
Mains buffering, min. | 20 ms; To backplane bus / electronics of the IM 151-2 and to PROFIBUS-DP Ex i interface |
Input current |
Current consumption, max. | 2800 mA |
Power losses |
Power loss, max. | 14 W |
Interrupts/diagnostics/status information |
Diagnostic messages |
Diagnostic information readable | No |
Diagnostics indication LED |
Rated load voltage PWR (green) | Yes |
Status indicator output 24 V OK (green) | Yes |
Galvanic isolation |
Galvanic isolation | between supply voltage and power bus, between supply voltage and backplane bus as well as PROFIBUS DP interface, between power bus and backplane bus as well as PROFIBUS DP interface, between backplane bus and PROFIBUS DP interface |
Permissible potential difference |
between all secondary voltages | 60 V |
between supply voltage and all secondary voltages | 375 V |
Isolation |
Isolation checked with | 1500 V AC between supply voltage and all secondary voltages, 500 V AC between all output voltages |
Standards, approvals, certificates |
Use in hazardous areas |
Type of protection acc. to EN 50020 (CENELEC) | II2G EEx de [ia/ib] IIC/IIB T4, Tu = -20 °C to +60 °C (Tu = +60 °C for horizontal mounting) |
Type of protection acc. to FM | Available soon: FM 3611: Class I, Division 2, Group A-D, Class I, Zone 2 or FM 3610: Class I, Zone 1, Tu = -20 °C to +60 °C |
Dimensions |
Width | 96.5 mm |
Height | 150 mm |
Depth | 150 mm |
Weight |
Weight, approx. | 2500 g |
Status | Jan 30, 2012 |