| Product type designation | SCALANCE W786-3PRO |
| | IWLAN ACCESS POINT SCALANCE W786-3PRO, ONLY FOR USE IN USA, IEEE 802.11B/G/A/H, INDUSTRIAL WIRELESS LAN (IWLAN) 2.4/5 GHZ, UP TO 54MBIT/S, WPA2/802.11I/11E, NOTE NATIONAL APPROVALS, 48V DC, IP65(-40-+70 DGR C), 6XEXT. ANTENNA CONNECTIONS 3 RADIO INTERFACES, FO (GLASS-FOC,MULTIMODE)SOCKET, SCOPE OF SUPPLY: MOUNTING MATERIAL, MANUAL ON CD-ROM, GERMAN/ ENGLISH; 48VDC TERMINAL BLOCK |
| Transmission rate | |
| Transfer rate | |
| | 54 Mbit/s |
| | 10… 100 Mbit/s |
| | Due to the simultaneous use of several radio channels, a transmission rate of 108 Mbit/s is possible (turbo mode) |
| Interfaces | |
| Number of electrical connections | |
| | 1 |
- for redundant power supply
| 1 |
| Design of electrical connection | |
| | 2-pole connector (48 V DC) or optionally available power supply adapter (4-pole 12 to 24 V DC or 3-pole 100 to 240 V AC) |
| Number of optical interfaces / for optical waveguide / at 100 Mbit/s | 1 |
| Design of optical interface / for optical waveguide / at 100 Mbit/s | Duplex multimode FOC (ST) |
| design of the removable storage / C-PLUG | Yes |
| Interfaces / wireless | |
| Number of radio cards / permanently installed | 3 |
| Number of electrical connections / for external antenna(s) | 6 |
| Design of the electrical connection / for external antenna(s) | R-SMA female (socket) |
| Supply voltage, current consumption, power loss | |
| Type of voltage / of supply voltage | DC |
| Supply voltage | |
| | 48 V |
- from Power-over-Ethernet according IEEE802.3at for type 1 and IEEE802.3af
| 48 V |
- from optional integratable power supply
| |
| | 100… 240 V |
| | 12… 24 V |
| Current consumed | |
- at 24 V / with DC / typical
| 0.46 A |
- at 48 V / with DC / typical
| 0.23 A |
- at 230 V / with AC / typical
| 0.05 A |
- with Power-over-Ethernet according to IEEE802.3at for type 1 and IEEE802.3af / typical
| 0.23 A |
| Active power loss | |
- at 24V / for DC / typical
| 11 W |
- at 48 V / with DC / typical
| 11 W |
- at 230 V / with AC / typical
| 11 W |
- with Power-over-Ethernet according to IEEE802.3at for type 1 and IEEE802.3af / typical
| 11 W |
| Permitted ambient conditions | |
| Ambient temperature | |
| | -40… +70 °C |
| | -40… +85 °C |
| | -40… +85 °C |
| Relative humidity / at 25 °C / without condensation / during operating / maximum | 100 % |
| Protection class IP | IP65 |
| Ambient condition / for (standard) operation mode | When using the power supply 100 to 240 V AC, an operating temperature of -40 °C to +60 °C is permissible |
| Design, dimensions and weight | |
| Width / of enclosure / without antenna | 251 mm |
| Height / of enclosure / without antenna | 251 mm |
| Depth / of enclosure / without antenna | 72 mm |
| Net weight | 2.24 kg |
| Type of mounting | |
| | Yes |
| Type of mounting | For mast mounting, 35 mm DIN rail mounting and S7-300 rail mounting, an additional support plate is required |
| Wireless frequencies | |
| Radio frequency | |
- for WLAN in 2.4 GHz frequency band
| 2.41… 2.48 GHz |
- for WLAN in 5 GHz frequency band
| 4.9… 5.8 GHz |
| Product properties, functions, components / general | |
| Number of SSIDs | 24 |
| Product function | |
| | No |
| | No |
| | No |
| | No |
| Number of iPCF-capable radio modules | 0 |
| Product functions / management, configuration | |
| Number of manageable IP addresses / in client | 8 |
| Product function | |
| | Yes |
| | Yes |
| | Yes |
| | Yes |
- Configuration with STEP 7
| Yes |
- configuration with STEP 7 in the TIA Portal
| Yes |
| | Yes |
- operation with IWLAN controller
| No |
- operation with Enterasys WLAN controller
| No |
| | Yes |
- forced roaming with IWLAN
| Yes |
| | Yes |
| Protocol / is supported | |
- Address Resolution Protocol (ARP)
| Yes |
| | Назад в раздел
|
