ГлавнаяКаталогАвтоматизация3RHпромышленная комутационная техника
 

CONTACTOR RELAY, 6NO+2NC, AC 110V, 50/60 HZ, W/ FULL-WAVE RECTIFIER, SZ S00, SPRING-LOADED TERMINAL, REMOVABLE AUX. SWITCH

Артикул: 3RH2362-2GG20
Производитель: Siemens


Наименование продукта
CONTACTOR RELAY, 6NO+2NC, AC 110V, 50/60 HZ, W/ FULL-WAVE RECTIFIER, SZ S00, SPRING-LOADED TERMINAL, REMOVABLE AUX. SWITCH
Жизненный цикл продукта
Разрешение на поставку Постепенное снятие продукта с производства Снятие продукта с производства Окончательное снятие продукта с производства
2009-11-19
    Версия от 2011-08-27
 
 
General technical data:
Product brand name   SIRIUS
Product designation   contactor relay
Size of the contactor   S00
Protection class IP / on the front   IP20
Degree of pollution   3
Insulation voltage / with degree of pollution 3 / rated value V 690
Installation altitude / at a height over sea level / maximum m 2000
Ambient temperature    
  • during transport
 °C -55… 80
  • during storage
 °C -55… 80
  • during operating phase
 °C -25… 60
Resistance against shock   10g / 5 ms and 5g / 10 ms
Impulse voltage resistance / rated value kV 6
Item designation    
  • according to DIN 40719 extendable after IEC 204-2 / according to IEC 750
   K
  • according to DIN EN 61346-2
   K
Mechanical operating cycles as operating time    
  • of the contactor / typical
   10000000
 
Control circuit:
Design of the surge suppressor   with full-wave rectification
Type of voltage / of the controlled supply voltage   AC
Control supply voltage frequency    
  • 1 / rated value
 Hz 50
  • 2 / rated value
 Hz 60
Control supply voltage / 1    
  • for DC / rated value
 V 100
  • at 50 Hz / for AC / rated value
 V 110
  • at 60 Hz / for AC / rated value
 V 110
Operating range factor control supply voltage rated value / of the solenoid    
  • at 50 Hz / for AC
   0.8… 1.1
  • at 60 Hz / for AC
   0.8… 1.1
Apparent pull-in power / of the solenoid / for AC V·A 37
Apparent holding power / of the solenoid / for AC V·A 5.7
Holding power / of the solenoid / for DC W 4
Pull-in power / of the solenoid / for DC W 4
Resistive loss / of the magnet coil / for DC / typical W 4
Inductive power factor    
  • with the pull-in power of the coil
   0.8
  • with the pull-in power of the coil
   0.25
 
Auxiliary circuit:
Product extension / auxiliary switch   No
Identification number and letter for switching elements   62 E
Contact reliability / of the auxiliary contacts   1 faulty switching per 100 million (17 V, 1 mA)
Number of NC contacts / for auxiliary contacts   2
  • instantaneous switching
   2
  • delayed switching
   0
  • asynchronous switching
   0
  • lagging switching
   0
Number of NO contacts / for auxiliary contacts   6
  • instantaneous switching
   6
  • delayed switching
   0
  • asynchronous switching
   0
  • leading switching
   0
Number of changeover contacts    
  • for auxiliary contacts
   0
Operating current / of the auxiliary contacts    
  • at AC-12 / maximum
 A 10
  • at AC-15
    
  • at 230 V
 A 10
  • at 400 V
 A 3
  • at 500 V
 A 2
  • at 690 V
 A 1
  • with 1 current path
    
  • at DC-12
    
  • at 24 V
 A 6
  • at 110 V
 A 3
  • at 220 V
 A 1
  • at DC-13
    
  • at 24 V
 A 6
  • at 110 V
 A 1
  • at 220 V
 A 0.3
 
Short-circuit:
Design of the fuse link / for short-circuit protection of the auxiliary switch    
  • required
   Fuse gL/gG: 10 A, miniature circuit breaker C 6 A (short-circuit current Ik < 400 A)
 
Installation/mounting/dimensions:
Built in orientation   vertical
Type of mounting   screw and snap-on mounting onto 35 mm standard mounting rail
Width mm 45
Height mm 70
Depth mm 73
Distance, to be maintained, to the ranks assembly    
  • forwards
 mm 0
  • backwards
 mm 0
  • upwards
 mm 0
  • downwards
 mm 0
  • sidewards

Назад в раздел