DIGITAL OUTPUT MODULE DM6 FOR HEATING SYSTEM CONTROL SIPLUS HCS300I WITH INTEGRATED INTERFACE TO CONNECT THE CONNECTION CABLES TO THE SOLID STATE RELAYS THE PREASSEMBLED CABLES ARE AVAILABLE UNDER ORDER NUMBER: 6BK1700-2FA00-0AA0 AND 6BK1700-2FA10-0AA0

Артикул: 6BK1700-2BA80-0AA0
Производитель: Siemens


Наименование продукта
DIGITAL OUTPUT MODULE DM6 FOR HEATING SYSTEM CONTROL SIPLUS HCS300I WITH INTEGRATED INTERFACE TO CONNECT THE CONNECTION CABLES TO THE SOLID STATE RELAYS THE PREASSEMBLED CABLES ARE AVAILABLE UNDER ORDER NUMBER: 6BK1700-2FA00-0AA0 AND 6BK1700-2FA10-0AA0
Жизненный цикл продукта
Разрешение на поставку Постепенное снятие продукта с производства Снятие продукта с производства Окончательное снятие продукта с производства
2010-02-11
    Версия от 2011-11-15
 
DIGITAL OUTPUT MODULE DM6 FOR HEATING SYSTEM CONTROL SIPLUS HCS300I WITH INTEGRATED INTERFACE TO CONNECT THE CONNECTION CABLES TO THE SOLID STATE RELAYS THE PREASSEMBLED CABLES ARE AVAILABLE UNDER ORDER NUMBER: 6BK1700-2FA00-0AA0 AND 6BK1700-2FA10-0AA0
Product brand name   SIPLUS
product designation   Heating control HCS300I
Design of the product   Digital module
 
Inputs/ Outputs:
Number of digital outputs   6
Type of voltage / of the outputs   DC
Output voltage V 18.2 28.8
  • for DC / rated value
V 24
Characteristic feature of the output / short-circuit protected   Yes
Output current / at the digital output / for signal <1> / maximum mA 500
Switching frequency / of the outputs / at resistive load / maximum Hz 50
  • comment
  with a 50 Hz digital module; at maximum configuration min. 20 Hz
Galvanic isolation / between the outputs   No
Galvanic isolation / between the outputs and system interface   No
 
General technical data:
Item designation / according to DIN 40719 extendable after IEC 204-2 / according to IEC 750   F
Item designation / according to DIN EN 61346-2   F
Number of status displays   1
Type of display / as status display by LED   continuous light: ready, flashing light: no connection to basic device
 
Communication:
Design of the interface   system interface
 
Supply voltage:
Design of the power supply   Supply via base unit
 
Ambient conditions:
   
Protection class IP   IP20
Resistance against shock / according to IEC 60068-2-27   15g / 11 ms
Resistance against vibration / according to IEC 60068-2-6   5 ... 500 Hz, 3.5 mm A, 1g, 10 cycles, 1 octave/min
Conductor-bound parasitic coupling BURST / according to IEC 61000-4-4   2 kV (power ports) / 1 kV (signal ports)
Conductor-bound parasitic coupling SURGE / according to IEC 61000-4-5   on power supply lines: 1 kV symmetric, 2 kV asymmetric, on signal lines > 30 m unshielded: 1 kV symmetric, 2 kV asymmetric, > 30 m shielded: 2 kV asymmetric
Conducted interference as high-frequency radiation / according to IEC 61000-4-6   10 V
Conductor-bound parasitic coupling conductor-earth SURGE / according to IEC 61000-4-5   2 kV
Conductor-bound parasitic coupling conductor-conductor SURGE / according to IEC 61000-4-5   1 kV
Electrostatic discharge / according to IEC 61000-4-2   6 kV contact discharge / 8 kV air discharge
Field-bound parasitic coupling / according to IEC 61000-4-3   10 V/m
EMC emitted interference   IEC61131: Class A; conducted and radiated: DIN EN 55011/CISPR11 (corresponds to degree of severity A)
Installation altitude / at a height over sea level / maximum m 2,000
Ambient temperature    
  • during storage
°C -40 80
  • during operating
°C -25 60
  • during transport
°C -40 80
Air pressure    
  • during operating phase
hPa 795 1,080
  • during storage
hPa 660 1,080
 
Connections:
Product function / solid-state relay control via prefabricated connection cable   Yes
 
connector/ bushing
Design of the switching output   semiconductor output (high side switch)
Design of the electrical connection / of the inputs and outputs   screw terminal, CableAssembly
 
terminals
Design of the electrical connection / for auxiliary and control current circuit   screw-type terminals
Product function / removable terminal for auxiliary and control circuit   Yes
Type of the connectable conductor cross-section    
  • for auxiliary contacts
   
  • solid
  1x (0.5 ... 4 mm2), 2x (0.5 ... 2.5 mm2)
  • finely stranded / with conductor end processing
  1x (0.5 ... 2.5 mm2), 2x (0.5 ... 1.5 mm2)
  • for AWG conductors / for auxiliary contacts
  1x (20 ... 12), 2x (20 ... 16)
 
Installation/mounting/dimensions:
Built in orientation   any
Type of mounting   snap-on fastening on 35 mm standard mounting rail or screw fastening using an additional push-in lug
Width mm 22.5
Height mm 92
Depth mm 115
 
Certificates/approvals:
Verification of suitability   CE / C-TICK
General Product Approval
UL
         
 
Further information:
Information- and Downloadcenter (Catalogs, Brochures,…)
http://www.automation.siemens.com/mcms/topics/en/siplus/industrial-heating-control/Pages/home.aspx
Industry Mall (Online ordering system)
http://www.siemens.com/industrial-controls/mall
CAx-Online-Generator
http://www.siemens.com/cax
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
http://support.automation.siemens.com/WW/view/en/6BK1700-2BA80-0AA0/all
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, ...)
http://www.automation.siemens.com/bilddb/cax_en.aspx?mlfb=6BK1700-2BA80-0AA0
 
 
 
last change:
Aug 25, 2011


Назад в раздел