| Similar to image | | SURGE ARRESTER TYPE 2 REQUIREMENT CATEGORY C, UC 350V PLUG-IN PROTECTION BLOCKS 2POLE, 1+1 CIRCUIT FOR TN-S AND TT SYSTEMS NARROW DESIGN |
|
Technical data: | | |
Protection level | kV | 1.4 |
Type of the power supply network | | 2 |
Type of mounting | | standard mounting rail |
Conductor cross section that can be connected / for rigid conductor / minimum | mm? | 1.5 |
Conductor cross section that can be connected / for rigid conductor / maximum | mm? | 35 |
Conductor cross section that can be connected / finely stranded / minimum | mm? | 1.5 |
Conductor cross section that can be connected / finely stranded / maximum | mm? | 25 |
Product component / remote-signaling contact | | No |
Size of the surge arrester | | other |
Continuous operating voltage / with AC / maximum | V | 350 |
Discharge current / at (8/20) µs / nominal value | kA | 40 |
Operating voltage / with AC / nominal value | V | 240 |
Type of distribution system | | TN-S and TT |
SPD classification / acc. to EN 61643-11 / test class II type 2 | | Yes |
Protection level / between N and L | kV | 1.4 |
Protection level / between PE and N and/or L | kV | 1.5 |
Signal design | | optical |
|
Certificates/approvals: |
|
|
|
last change: | Aug 26, 2011 |