7KE45

Артикул	Наименование	Производитель
7KE4531-3HH	MEMORY DRIVE BUILT INTO A 19-INCH SUBRACK, 3 UNITS HIGH, WITH TWO 40-MBYTE DRIVES, WITH INTEGRATED POWER SUPPLY UNIT DC 250 V	Siemens
7KE4531-2AJ	FREQUENCY DATA ACQUISITION MODULE FDAU, 4 CHANNELS, RESOLUTION 12 BIT	Siemens
7KE4531-3JA	SUBRACK NOT CONFIGURED FOR 20/160 CONTROL UNIT	Siemens
7KE4531-3HG	MEMORY DRIVE BUILT INTO A 19-INCH SUBRACK, 3 UNITS HIGH, WITH TWO 40-MBYTE DRIVES, WITH INTEGRATED POWER SUPPLY UNIT DC 220 V	Siemens
7KE4531-2AK	CENTRAL PROCESSOR MODULE CPU	Siemens
7KE4531-2AL	SERIAL/PARALLEL BUS MODULE SPM	Siemens
7KE4531-2AM	CMOS-RAM MODULE CRM	Siemens
7KE4531-3JB	SUBRACK NOT CONFIGURED FOR 24/192 DATA ACQUISITION	Siemens
7KE4531-2AN	DISPLAY MODULE LDM	Siemens
7KE4531-4AB	PT18 PRINTER WITH NEEDLE MECHANSISM, CENTRONICS INTERFACE AND 5 M LONG CABLE FOR PAPER WIDTH 250 MM, BENCH-TOP UNIT, POWER SUPPLY AC 220 V	Siemens
7KE4531-2AP	FLOPPY DISK CONTROLLER CNT	Siemens
7KE4531-4AC	PT19 PRINTER WITH NEEDLE MECHANISM, CENTRONICS INTERFACE AND 5 M LONG CABLE FOR PAPER WIDTH 400 MM, BENCH-TOP UNIT POWER SUPPLY AC 220 V	Siemens
7KE4531-2AQ	INTERFACE MODULE IFM INTERFACE - X3, STANDARD - RS232	Siemens
7KE4531-8AD	DATA CABLE FOR CONNECTING OF A PRINTER WITH V.24 INTERFACE TO OSCILLOSTORE P531, 10 M	Siemens
7KE4531-4AD	7KE4531-4AD	Siemens
7KE4531-8AE	DATA CABLE FOR CONNECTING OF A PRINTER WITH CENTRONICS INTERFACE TO OSCILLOSTORE P531, 2 M	Siemens
7KE4531-2HN	DATA TRANSFER MODULE FOR PLUG-IN SLOT 1 OR 2 OF THE COMBINED FEED-IN AND DATA TRANSFER MODULE, AS BLIND COVER	Siemens
7KE4531-2JA	POWER SUPPLY UNIT FOR CENTRAL UNIT 7KE4531-1D... 110/220V AC, 50/60HZ	Siemens
7KE4531-8AF	DCF-77 ANTENNA WITH CABLE, 10 M (ONLY FOR DCF-77 RECEIVER MODULE 7KE4 531-2AR)	Siemens
7KE4531-2JB	POWER SUPPLY UNIT FOR CENTRAL UNIT 7KE4531-1D... 24V DC	Siemens
7KE4531-8AG	FIBER-OPTIC CABLE FOR DISTANCES UP TO 50 M	Siemens
7KE4531-2JC	POWER SUPPLY UNIT FOR CENTRAL UNIT 7KE4531-1D... 48V DC	Siemens
7KE4531-2JD	POWER SUPPLY UNIT FOR CENTRAL UNIT 7KE4531-1D... 60V DC	Siemens
7KE4531-8AH	SET OF TEST ADAPTERS FOR OSCILLOSTORE P531 MODULES	Siemens
7KE4531-8AJ	FIBER-OPTIC CABLE FOR DISTANCES UP TO 2000 M	Siemens
7KE4531-2JE	POWER SUPPLY UNIT FOR CENTRAL UNIT 7KE4531-1D.... 110V DC	Siemens
7KE4531-2JF	POWER SUPPLY UNIT FOR CENTRAL UNIT 7KE4531-1D... 125V DC	Siemens
7KE4531-8AK	TWINAX-CABLE, 0,5M LONG	Siemens
7KE4531-8AL	TEST ADAPTOR, CAN BE USED FOR ALL ACQUISITION UNITS OF THE OSCILLOSTORE P531 SYSTEM	Siemens
7KE4531-8AM	CONNECTION CABLE FOR ANALOG SIGNALS 4/2, 8-WIRE, FLEXIBLE, WIRES MARKED,WIRE CROSS-SECTION 2.5 MM2, 2 M LONG, WITH WIRE END TUBES, FOR CONNECTION OF ANALOG SIGNALS: FOR 4 CHANNELS ADAU/PDAU, WITH PLUG CONNECTION	Siemens