A1D50

Артикул	Наименование	Производитель
A1D50116022-99	USED COMPONENT FEEDER CHANGEOVE R TABLE WITH INTEGRATED REEL CO NTAINER FOR SIPLACE. INSTALLATI ON ON RIGHTHAND SIDE RELATED TO DIRECTION OF PCB TRANSPORT. CO MPONENT FEEDER CAPACITY 1 X 40 8 MM TAPES. REQUESTED ONLY FOR THE FIRST INSTALLATION OF A COM PONENT FEEDER CHANGEOVER TABLE PER SIPLACE F STATION, WITHOUT ACCESSORY.	Siemens
A1D50116113-99	USED SET OF BALL SLEEVES FOR 12 -SEGMENT COLLECT AND PLACE HEAD . ADDITIONAL SET FOR CHANGE OVE R TO INCREASE MACHINE AVAILABIL ITY.	Siemens
A1D50119000-99	USED: SMD PLACEMENT STATION SIP LACE HS-50. MAXIMUM PLACEMENT R ATE 50.000 COMP./HOUR. COMPONEN T FEEDER CAPACITY: 144 X 8 MM T APES. 4 X 12-SEGMENT COLLECT AN D PLACE HEADS WITH COMPONENT VI SION. COMPONENT RANGE FROM 0402 TO 18,7 MM X 18,7 MM. PCB-SIZE : 50 MM X 50 MM TO 368 MM X 460 MM. ACCESSORIES: 1 COMPONENT F EEDER CHANGEOVER TABLE PER COLL ECT AND PLACE HEAD, 4 TAPE CUTT ERS, STATION COMPUTER WITH 2 FL AT SCREEN MONITORS AND KEYBOARD S. -PRICE UPON INQUIRY- PERFOR MANCE/ACCEPTANCE PACKAGE FOR OV ERHAULING MACHINES: CHECK OF ME CHANICAL COMPONENTES CHECK OF W IRING AND CABLES REPLACEMENT OF ALL DEFECTIVE PARTS AND COMPON	Siemens
A1D50119022-99	USED COMPONENT FEEDER CHANGEOVE R TABLE FOR SIPLACE HS-50 AND H S-60.CONVEYOR HEIGHT 830-950MM. WITH INTEGRATED LIFTING DEVICE AND INTEGRATED REEL CONTAINER FOR BOTH SIDES OF THE MACHINE, FOR MINIMIZATION OF SETUP TIMES . COMPONENT FEEDER CAPACITY: 36 X 8MM TAPES.	Siemens
A1D50119400-99	USED: SMD PLACEMENT STATION WIT H A MAXIMUM PLACEMENT RATE OF 6 0,000 COMP./H. FOR DETAILS SEE THE CURRENT SCOPE OF SERVICE AN D DELIVERY. THE MACHINE FEATURE S A COMPONENT FEEDER CAPACITY O F 144 X 8MM TAPES. FOUR 12-SEGM ENT COLLECT AND PLACE HEADS WIT H INTEGRATED COMPONENT VISION S YSTEM ARE CAPABLE TO HANDLE A C OMPONENT RANGE FROM 0201 UP TO 18,7MM X 18,7MM. FOR THE PLACEM ENT OF 0201 COMPONENTS THE 0201 PACKAGE PHASE 2 (ITEM NO. 1180 20) AND THE COMPONENT SENSOR (I TEM NO.118021) ARE RECOMMENDED. THE MACHINE WITH THE SINGLE CO NVEYOR IS ABLE TO HANDLE PCBS F ROM 50MM X 50MM (2 INCH X 2 INC H) TO 368MM X 460MM (18 INCH X	Siemens
A1D50116114-99	USED SET OF BALL SLEEVES FOR 6- SEGMENT COLLECT AND PLACE HEAD. ADDITIONAL SET FOR CHANGE OVER TO INCREASE MACHINE AVAILABILI TY.	Siemens
A1D50119600-99	USED: SMD PLACEMENT STATION FOR END-OF-LINE/HIGH-END COMPONENT S WITH A MAXIMUM PLACEMENT RATE OF 17,000 CPH (IN ACCORDANCE W ITH SCOPE OF SERVICE AND DELIVE RY). THE PLACEMENT STATION PROV IDES A FEEDER CAPACITY OF MAXIM UM 180 X 8MM TAPES. THE PLACEME NT STATION IS EQUIPPED WITH A 1 2-SEGMENT COLLECT AND PLACE HEA D RESPECTIVELY A 6-SEGMENT COLL ECT AND PLACE HEAD OR A TWIN HE AD. THE FOLLOWING HEAD CONFIGUR ATIONS ARE INCLUDED AS STANDARD SCOPE OF DELIVERY: GANTRY 1: T WIN HEAD (ITEM NO. 119620) GANT RY 3: TWIN HEAD (ITEM NO. 11962 0). BY ORDERING AN HF PLACEMENT STATION AN ADDITIONAL DEFINITI ON OF THE PLACEMENT HEAD CONFIG	Siemens
A1D50116226-99	USED COMPONENT CHANGEOVER TABLE , MOBILE 830-950MM FOR SIPLACE F/F4/F5/S-20/S-23HM/S-25HM AND S-27HM MACHINES. BOTH SIDES OF THE MACHINE WITH INTEGRATED LIF TING DEVICE AND INTEGRATED REEL CONTAINER FOR MINIMIZATION OF SETUP TIMES. FEEDER CAPACITY 59 X 8MM TAPES, VERSION 230V/110V . INSTALLATIONS ON SIPLACE 80 S -15/20 AND SIPLACE 80 F/F4 MACH INES REQUEST ADDITIONAL ITEM NO 00345097-01. IN ORDER TO AVOID HEAD CRASH, CAUSED BY NON CORR ECTLY FIXED COMPONENT FEEDERS, IT IS RECOMMENDET TO USE THE IT EM NO 116225 (FEEDER FASTENING ATTACHEMENT).	Siemens
A1D50116334-99	USED LINE COMPUTER FOR SIPLACE G2/S-15/20/F/F4/F5HM/S-25HM,S-2 7HM/HS-50/HS-60 WITH TABLE,WITH SOFTWARE FOR COMMUNICATIONS WI TH STATION AND SUPERVISOR COMPU TERS. OPERATING SYSTEM LINUX. O PERATING VOLTAGE ADJUSTABLE TO 220-240V/50HZ OR 110-120V/50-60 HZ.	Siemens
A1D50116336-99	USED LINE COMPUTER FOR SIPLACE G2/S-15/S-20/F/F4/F5HM/S-25HM/S -27HM/HS-50/HS-60 WHITHOUT TABL E, WITH SOFTWARE FOR COMMUNICAT IONS WITH STATION AND SUPERVISO R COMPUTERS. OPERATING SYSTEM L INUX. OPERATING VOLTAGE ADJUSTA BLE TO 220-240V/50HZ OR 110-120 V/50-60HZ.	Siemens
A1D50119622-04	USED:COMPONENT FEEDER CHANGEOVE R TABLE, HEIGHT 830-950MM, WITH INTEGRATED REEL CONTAINER. FOR SIPLACE HF/X-SERIES/D3.COMPONE NT FEEDER CAPACITY (TYP S): 15 SLOTS. WITH WHEELS FOR MINIMIZA TION OF SETUP TIMES.	Siemens
A1D50119700-99	USED: 2 GANTRY SMD PLACEMENT ST ATION WITH A MAXIMUM PLACEMENT RATE OF 60.000 CPH. FOR DETAILS SEE VALID SCOPE OF DELIVERY. T HE PLACEMENT STATION OFFERS A S ETUP CAPACITY OF 160 X 8MM FEED ERS WHEN USING THE X-FEEDER TYP E. DEPENDING ON CUSTOMERS REQUI REMENTS SIPLACE X2 CAN BE EQUIP PED WITH 20-SEGMENT COLLECT AND PLACE (ITEM NO: 119732), 12-SE GMENT COLLECT AND PLACE (ITEM N O: 119731) 6-SEGMENT COLLECT AN D PLACE HEAD (ITEM NO: 119730) OR A TWIN HEAD (ITEM NO. 119733 ) EACH HEAD INCLUDES A COMPONEN T CAMERA. THE HEADS SHOULD BE O RDERED SEPARATELY WITH THE PLAC EMENT STATION, ONE HEAD MUST BE ORDERED FOR EACH GANTRY OF THE	Siemens
A1D50119622-99	USED:COMPONENT FEEDER CHANGEOVE R TABLE, HEIGHT 830-950MM, WITH INTEGRATED REEL CONTAINER. FOR SIPLACE HF-SERIES.COMPONENT FE EDER CAPACITY: 15 SLOTS. WITH W HEELS FOR MINIMIZATION OF SETUP TIMES.	Siemens
A1D50116428-99	USED WAFFLE-PACK CHANGER FOR SI PLACE F4/F5HM COMBINED WITH FIX ED COMPONENT TABLE FOR TRANSPOR T HEIGHT 830MM-950MM. VERSION F OR 230/110V. STORAGE CAPACITY O F 28 WAFFLE PACK TRAYS, MAX. SI ZE OF WAFFLE PACK TRAY 240MM X 340MM X 13MM. TRAY CHANGEOVER T IME 2,5S. 10 FEEDER LOCATIONS R EQUIRED FOR WAFFLE-PACK CHANGER , RELATED TO RIGHTHAND SIDE OF TRANSPORT DIRECTION. -PRICE UPO N INQUIRY-	Siemens
A1D50119722-99	USED:COMPONENT FEEDER CHANGEOVE R TABLE WITH 40 X-FEEDER SLOTS FOR SIPLACE X-SERIES MACHINES, 830MM-950MM WITH INTEGRATED REE L CONTAINER AND WHEELS FOR MINI MIZATION OF SETUP TIMES.	Siemens
A1D50119650-99	USED: SMD PLACEMENT STATION FOR END-OF-LINE/HIGH-END COMPONENT S WITH A MAXIMUM PLACEMENT RATE OF 40,800 CPH (IN ACCORDANCE W ITH SCOPE OF SERVICE AND DELIVE RY). THE PLACEMENT STATION PROV IDES A FEEDER CAPACITY OF MAXIM UM 180 X 8MM TAPES. THE PLACEME NT STATION IS EQUIPPED WITH 12- SEGMENT COLLECT AND PLACE HEADS , 6-SEGMENT COLLECT AND PLACE H EADS OR TWIN HEAD. THE FOLLOWIN G HEAD CONFIGURATIONS ARE INCLU DED AS STANDARD SCOPE OF DELIVE RY: PLACEMENT AREA 1: GANTRY 1: 12-SEGMENT COLLECT AND PLACE H EAD (ART. NR.119616). GANTRY 4: 12-SEGMENT COLLECT AND PLACE H EAD (ART. NR.119616). PLACEMENT AREA 2: GANTRY 3: TWIN HEAD (A	Siemens
A1D50116438-99	USED MATRIX TRAY CHANGER 2 FOR SIPLACE HF-SERIES PLACEMENT STA TION, CONSISTING OF TWO INDEPEN DENTLY DRIVEN TOWERS.(HF CAN BE DOCKED IN LOCATIONS 2 AND/OR 4 , HF/3 CAN BE DOCKED ONLY IN LO CATION 2). MAXIMUM TRAY SIZE: 2 40MM X 340MM. MAXIMUM PERMISSIB LE HEIGHT OF THE WAFFLE PACK TR AY INCLUDING THE COMPONENT: 31. 5MM. THE MTC2 CAN BE ADAPTED TO MACHINE HEIGHTS OF 830-950MM. POWER SUPPLY: 3 X 200V-400V / 5 0-60 HZ. -PRICE UPON INQUIRY-	Siemens
A1D50116441-99	USED WAFFLE-PACK CHANGER FOR SI PLACE F5 HM COMBINED WITH FIXED COMPONENT TABLE FOR TRANSPORT HEIGHT 830-950MM. VERSION FOR 2 30/110V. STORAGE CAPACITY OF 28 WTC (WAFFLE PACK TRAY CARRIER) , MAX. SIZE OF WAFFLE PACK TRAY 240MM X 340MM X 13MM. TRAY CHA NGEOVER TIME 2.5S. 10 FEEDER LO CATIONS REQUIRED FOR WAFFLE-PAC K CHANGER, RELATED TO RIGHTHAND SIDE OF TRANSPORT DIRECTION. O FFSET-WTC ENABLE THE 6-SEGMENT COLLECT AND PLACE HEAD TO PICK UP ALL COMPONENTS FROM WAFFLE P ACK TRAY CARRIER. -PRICE UPON I NQUIRY-	Siemens
A1D50116600-99	USED: SMD ADHESIVE APPLICATION STATION SIPLACE G. MAXIMUM ADHE SIVE APPLICATION RATE 33,000 DO TS/H PROVED AT THE EA 1 REFEREN CE BOARD, 3 DISPENSING UNITS WI TH AUTOMATIC ADJUSTMENT OF THE DISPENSING QUANTITY AS A FUNCTI ON OF THE LEVEL, DOT RANGE CAN BE PROGRAMMED IN 20 INCREMENTS PER HEAD, CARTRIDGE SIZE 10 ML, REGULATION OF ADHESIVE TEMPERA TURE AND MONITORING OF LEVEL, O PTICAL PCB BOARD POSITION. PCB- SIZE: MAX. 460 MM X 460 MM. ACC ESSORIES: STATION COMPUTER WITH MONITOR. -PRICE UPON INQUIRY- PERFORMANCE/ACCEPTANCE PACKAGE FOR OVERHAULING MACHINES: CHE CK OF MECHANICAL COMPONENTES C HECK OF WIRING AND CABLES REPL	Siemens
A1D50119750-99	USED: 3 GANTRY SMD PLACEMENT ST ATION WITH A MAXIMUM PLACEMENT RATE OF 60.000 CPH. FOR DETAILS SEE VALID SCOPE OF DELIVERY. T HE PLACEMENT STATION OFFERS A S ETUP CAPACITY OF 160 X 8MM FEED ERS WHEN USING THE X-FEEDER TYP E. DEPENDING ON CUSTOMER REQUIR EMENTS, SIPLACE X3 CAN BE EQUIP PED WITH 20-SEGMENT COLLECT UND PLACE (ITEM NO: 119732), 12-SE GMENT COLLECT UND PLACE (ITEM N O: 119731) 6-SEGMENT COLLECT UN D PLACE HEADS (ITEM NO:119730) OR A TWIN HEAD (ITEM NO: 119733 ), EACH HEAD INCLUDES A COMPONE NT CAMERA. THE HEADS SHOULD BE ORDERED SEPARATELY WITH THE PLA CEMENT STATION, ONE HEAD MUST B E ORDERED FOR EACH GANTRY OF TH	Siemens
A1D50116900-99	USED: SMD PLACEMENT STATION SIP LACE S-20.CONSISTING OF: PLACEM ENT PERFORMANCE 20.000 COMPONEN TS PER HOUR SEE SPECIFICATION E DITION 5.0. MAX. COMPONENT FEED ER CAPACITY 2 X 40 8MM TAPES, 2 COLLECT AND PLADE HEADS WITH 1 2 NOZZLES EACH,RANGE FROM 0402 TO 14 X 18, PCB SIZE 50X50MM TO 460X460MM 2 COMPONENT CHANGEOV ER TABLES FOR LEFT/RIGHTHAND SI DE, 2 AUTOM. EMPTY TYPE CUTTERS , PCB VISION SYSTEM, 1 STATION COMPUTER WITH COLOUR MONITOR. - PRICE UPON INQUIRY- PERFORMANC E/ACCEPTANCE PACKAGE FOR OVERHA ULING MACHINES: CHECK OF MECHAN ICAL COMPONENTES CHECK OF WIRIN G AND CABLES REPLACEMENT OF ALL DEFECTIVE PARTS AND COMPONENTS	Siemens
A1D50117000-99	USED: SMD PLACEMENT STATION SIP LACE F4.12-SEGMENT COLLECT AND PLACE HEAD, BENCHMARK PLACEMENT RATE: 10.000 CP/HR COMPONENT F EEDER CAPACITY: 2X40 8MM TAPES, PLACEMENT HEADS: 1 PICK AND PL ACE HEAD WITH COMPONENT VISION SYSTEM AND 1 12-SEGMENT COLLECT AND PLACE HEAD WITH OPTICAL CO MPONENT RECOGNITION SYSTEM, COM PONENT SIZE: 0402 TO 55X55MM, P CBOARD SIZE: 50X50MM TO 460X460 MM, INCLUDING: 1 COMPONENT CHAN GEOVER TABLE ON LEFTHAND SIDE, 2 AUTOMATIC TAPE CUTTERS, STATI ON COMPUTER. -PRICE UPON INQUIR Y- PERFORMANCE/ACCEPTANCE PACK AGE FOR OVERHAULING MACHINES: C HECK OF MECHANICAL COMPONENTES CHECK OF WIRING AND CABLES REPL	Siemens
A1D50119780-99	USED: 4 GANTRY SMD PLACEMENT ST ATION WITH A MAXIMUM PLACEMENT RATE OF 80.000 CPH. FOR DETAILS SEE VALID SCOPE OF DELIVERY. T HE PLACEMENT STATION OFFERS A S ETUP CAPACITY OF 160 X 8MM FEED ERS WHEN USING THE X-FEEDER TYP E. DEPENDING ON CUSTOMER REQUIR EMENTS, SIPLACE X4 CAN BE EQUIP PED WITH 20-SEGMENT COLLECT AND PLACE (ITEM NO: 119732), 12-SE GMENT COLLECT AND PLACE (ITEM N O: 119731) OR 6-SEGMENT COLLECT AND PLACE HEADS (ITEM NO:11973 0) EACH HEAD INCLUDES A COMPONE NT CAMERA. THE HEADS SHOULD BE ORDERED SEPARATELY WITH THE PLA CEMENT STATION, ONE HEAD MUST B E ORDERED FOR EACH GANTRY OF TH E PLACEMENT STATION. THE FOLLOW	Siemens
A1D50117004-99	USED: SMD PLACEMENT STATION SIP LACE F4. ATTENTION: MACHINE HAS BEEN REBUILT FROM S-20 TO F4. THERE ARE NO TECHNICAL RESTRICT ION REFERING QUALITY AND UTILIT Y. IN CASE OF SPARE PART ORDER, THERE HAS TO BE AN REMARK OF R EBUILT. 12-SEGMENT COLLECT AND PLACE HEAD, BENCHMARK PLACEMEN T RATE: 10.000 CP/HR COMPONENT FEEDER CAPACITY: 2X40 8MM TAPES , PLACEMENT HEADS: 1 PICK AND P LACE HEAD WITH COMPONENT VISION SYSTEM AND 1 12-SEGMENT COLLEC T AND PLACE HEAD WITH OPTICAL COMPONENT RECOGNITION SYSTEM, C OMPONENT SIZE: 0402 TO 55X55MM, PCBOARD SIZE: 50X50MM TO 460X4 60MM, INCLUDING: 1 COMPONENT CH ANGEOVER TABLE ON LEFTHAND SIDE	Siemens
A1D50117003-99	USED: SMD PLACEMENT STATION SIP LACE F4. ATTENTION: MACHINE HAS BEEN REBUILT FROM F5 TO F4. TH ERE ARE NO TECHNICAL RESTRICTIO N REFERING QUALITY AND UTILITY. IN CASE OF SPARE PART ORDER, T HERE HAS TO BE AN REMARK OF REB UILT. 12-SEGMENT COLLECT AND PL ACE HEAD, BENCHMARK PLACEMENT RATE: 10.000 CP/HR COMPONENT FE EDER CAPACITY: 2X40 8MM TAPES, PLACEMENT HEADS: 1 PICK AND PLA CE HEAD WITH COMPONENT VISION SYSTEM AND 1 12-SEGMENT COLLECT AND PLACE HEAD WITH OPTICAL CO MPONENT RECOGNITION SYSTEM, COM PONENT SIZE: 0402 TO 55X55MM, P CBOARD SIZE: 50X50MM TO 460X460 MM, INCLUDING: 1 COMPONENT CHAN GEOVER TABLE ON LEFTHAND SIDE,	Siemens
A1D50117250-99	USED: SMD PLACEMENT STATION SIP LACE F5. MAXIMUM PLACEMENT RATE 8,000 COMP./H. COMPONENT FEEDE R CAPACITY: 2 X 40 8 MM TAPES. 1 X 6-SEGMENT COLLECT AND PLACE HEAD WITH COMPONENT VISION. CO MPONENT RANGE FROM 0603 TO 32 M M X 32 MM. 1 X PICK AND PLACE H EAD WITH COMPONENT VISION. COMP ONENT RANGE UP TO 55 MM X 55 MM . ACCESSORIES: 1 COMPONENT FEED ER CHANGEOVER TABLE - LEFTHAND SIDE, 2 TAPE CUTTERS, STATION C OMPUTER WITH MONITOR. -PRICE UP ON INQUIRY- PERFORMANCE/ACCEPT ANCE PACKAGE FOR OVERHAULING MA CHINES: CHECK OF MECHANICAL COM PONENTES CHECK OF WIRING AND CA BLES REPLACEMENT OF ALL DEFECTI VE PARTS AND COMPONENTS OVERHAU	Siemens
A1D50119800-99	USED: SMD PLACEMENT STATION SIP LACE D1 FOR END-OF-LINE/HIGH-EN D COMPONENTS WITH A MAXIMUM PLA CEMENT RATE OF 15,000 COMPONENT S PER HOUR. FOR DETAILS SEE CUR RENT VALID SCOPE OF SERVICE AND DELIVERY. THE PLACEMENT STATIO N PROVIDES A COMPONENT FEEDING CAPACITY OF MAXIMUM 90 X 8MM TA PES. THE PLACEMENT STATION CAN BE CONFIGURATED WITH ONE PICK A ND PLACE HEAD AND ALTERNATIVE W ITH A 12-SEGMENT COLLECT AND PL ACE HEAD OR A 6-SEGMENT COLLECT AND PLACE HEAD WITH INTEGRATED COMPONENT VISION. ADDITIONAL T O THAT, THE SIPLACE D1 CAN BE E QUIPPED ONLY WITH ONE PLACEMENT HEAD: D1 (6), D1 (12), D1 (PP) . DEPENDING ON THE HEAD CONFIGU	Siemens
A1D50119821-99	USED:COMPONENT FEEDER CHANGEOVE R TABLE, HEIGHT 830-950MM, WITH INTEGRATED REEL CONTAINER. FOR SIPLACE D4.COMPONENT FEEDER CA PACITY (TYP S): 12 SLOTS. WITH WHEELS FOR MINIMIZATION OF SETU P TIMES.	Siemens
A1D50119822-99	USED:COMPONENT FEEDER CHANGEOVE R TABLE, HEIGHT 830-950MM, WITH INTEGRATED REEL CONTAINER. FOR SIPLACE D1/D2.COMPONENT FEEDER CAPACITY (TYP S): 15 SLOTS. WI TH WHEELS FOR MINIMIZATION OF S ETUP TIMES.	Siemens
A1D50117500-99	USED: SMD PLACEMENT STATION SIP LACE F5 HM. SMD PLACEMENT STATI ON FOR END-OF-LINE/HIGH-END COM PONENTS WITH A MAXIMUM PLACEMEN T RATE OF 11,000 COMPONENTS PER HOUR. FOR DETAILS SEE CURRENT VALID SCOPE OF SERVICE AND DELI VERY. THE STATION PROVIDES A CO MPONENT CAPACITY OF MAXIMUM 118 X 8MM TAPES. THE MACHINE IS EQ UIPPED WITH ONE PICK AND PLACE HEAD AND ALTERNATIVE WITH A 12 -SEGMENT COLLECT AND PLACE HEAD OR A 6-SEGMENT COLLECT AND PLA CE HEAD WITH INTEGRATED COMPONE NT VISION. BY ORDER OF MACHINE AN ADDITIONAL DEFINITION OF THE COLLECT AND PLACE HEAD CONFIGU RATION IS REQUIRED: 12-SEGMENT COLLECT AND PLACE HEAD, ITEM NO	Siemens