Ind. angular measuring system | PMI360DV-F130-IU2E0-V15

Артикул: PMI360DV-F130-IU2E0-V15
Производитель: Pepperl-Fuchs

Analog output, load-dependent voltage or current
2 configurable switching frames
Parameterisable measuring range

Datasheet as PDF in following languages:

Technical Data: PMI360DV-F130-IU2E0-V15

General specifications
Measurement range		max. 360В° min. 45В°
Adjustment range		2 switch frames programmable , min. 5В°, max. 360В°
Rotational speed		max. 100 min^-1
Nominal ratings
Operating voltage		18 ... 30 V DC
Reverse polarity protection		reverse polarity protected
Repeat accuracy		± 0.25 В°
Resolution		0.2 В°
Temperature drift		0.02 В° / В°C (-25 В°C ... 70 В°C)
No-load supply current		≤ 45 mA
Indicators/operating means
LED yellow 1		switching state, Switching output 1
LED yellow 2		switching state, Switching output 2
LED PWR/ERR		status display LED, green/red (Power on / missing actuator / keylock)
LED U/I		Activator within measuring range
Switching output
Output type		2 switch outputs NPN, NO , reverse polarity protected , short-circuit protected , programmable
Operating current		≤ 100 mA
Switching hysteresis		1 В°
Voltage drop		≤ 3 V
Short-circuit protection		pulsing
Analog output
Output type		current output or voltage output (load dependend) 4 ... 20 mA (R_L < 400 Ω) 0 ... 10 V (R_L > 3.3 kΩ)
Linearity error		± 0.6 В° , (with original actuator)
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 IEC 60947-5-2:2007
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 70 В°C (-13 ... 158 В°F)
Mechanical specifications
Connection type		M12 x 1 connector, 5-pin
Protection degree		IP67
Material
	Housing	PBT
	Target	mild steel, e. g. 1.0037, SR235JR (formerly St37-2)
Mass		180 g

Назад в раздел