Singleturn absolute encoder | PSS58

Артикул: PSS58
Производитель: Pepperl-Fuchs



  • Industrial standard housing ∅58 mm
  • PROFIBUS interface
  • 16 Bit singleturn
  • Speed transfer
  • Extended scaling functions
  • Programmable limit switches
  • Commissioning mode
  • Recessed hollow shaft

Datasheet as PDF in following languages:


Technical Data: PSS58

General specifications
Detection typephotoelectric sampling
Functional safety related parameters
MTTFd80 a
Mission Time (TM)20 a
L10h1.9 E+11 at 6000 rpm and 20/40 N axial/radial shaft load
Diagnostic Coverage (DC)0 %
Electrical specifications
Operating voltage10 ... 30 V DC
No-load supply currentmax. 230 mA at 10 V DC
max. 100 mA at 24 V DC
Power consumptionmax. 2.5 W
Linearity± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit
Output codebinary code
Code course (counting direction)programmable,
cw ascending (clockwise rotation, code course ascending)
cw descending (clockwise rotation, code course descending)
Interface
Interface type PROFIBUS
Resolution
Single turnup to 16 Bit
Overall resolutionup to 16 Bit
Transfer rate0.0096 ... 12 MBit/s
Standard conformityPNO profile 3.062, RS 485
Connection
Terminal compartmentin removable housing cover
Standard conformity
Protection degreeDIN EN 60529, IP65
IP66 (with shaft seal)
Climatic testingDIN EN 60068-2-30 , no moisture condensation
Emitted interferenceEN 61000-6-4:2007
Noise immunityEN 61000-6-2:2005
Shock resistanceDIN EN 60068-2-27, 100 g, 6 ms
Vibration resistanceDIN EN 60068-2-6, 20 g, 10 ... 2000 Hz
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature-40 ... 85 В°C (-40 ... 185 В°F)
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Mechanical specifications
Material
Combination 1housing: powder coated aluminium
flange: aluminium
shaft: stainless steel
Combination 2 (Inox)housing: stainless steel
flange: stainless steel
shaft: stainless steel
Massapprox. 550 g (combination 1)
approx. 1100 g (combination 2)
Rotational speedmax. 12000 min -1
Moment of inertia30 gcm2
Starting torque≤ 3 Ncm (version without shaft seal)
Tightening torque, fastening screwsmax. 1.8 Nm
Shaft load
Angle offset± 0.9 В°
Axial offsetstatic: ± 0.3 mm, dynamic: ± 0.1 mm
Radial offsetstatic: ± 0.5 mm, dynamic: ± 0.2 mm


Назад в раздел