ControlNet copper/LWL adapter | RSD-CFA-Ex.CN

Артикул: RSD-CFA-Ex.CN
Производитель: Pepperl-Fuchs

Converts the ControlNet coaxial signals into TTL signals for the ControlNet LWL coupler
EEx ia IIC
Device installation in Zone 1, Zone 2, or Zone 22
Transfer rate 5 MBits/s
Connection of up to two LWL couplers, each with two bi-directional LWL transfer routes
1 power supply channel for 1 copper/fiber optic adapter

Datasheet as PDF in following languages:

ENG

DEU

Technical Data: RSD-CFA-Ex.CN

Supply
Connection		terminals V+, V-
Rated voltage		8.88 ... 9.5 V
Power loss		8 W
Power consumption		8.5 W
Internal bus
Connection		TTL bus
Interface		manufacturer specific bus
Max. number of fiber optic couplers		2
External bus
Connection		BNC connection
Interface		ControlNet international version 1.5, intrinsically safe
Transfer rate		5 MBit/s
Directive conformity
Electromagnetic compatibility
	Directive 2004/108/EC	EN 61326-1:2006
Explosion protection
	Directive 94/9/EC	EN 60079-0: 2006, EN 60079-11: 2007 , EN 60079-26:2007
Standard conformity
Insulation coordination		EN 50178
Electrical isolation		EN 60079-11:2007
Electromagnetic compatibility		NE 21:2006
Protection degree		IEC 60529
Climatic conditions		DIN IEC 721
Ambient conditions
Classification		3K3
Ambient temperature		-20 ... 70 В°C (-4 ... 158 В°F)
Storage temperature		-20 ... 100 В°C (-4 ... 212 В°F)
Relative humidity		95 % non-condensing
Shock resistance		15 g peak, 11 ms period
Vibration resistance		2 g , 10 ... 500 Hz according to IEC 60068-2-6
Damaging gas		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type		terminals, BNC connection
Core cross-section		max. 2.5 mm²
Protection degree		IP20, for on-site installation a separate housing is required with a minimum of IP54
Mass		approx. 320 g
Mounting		DIN rail mounting
Data for application in connection with Ex-areas
EC-Type Examination Certificate		DMT 99 ATEX 010 X , for additional certificates see www.pepperl-fuchs.com
	Group, category, type of protection	II (1)2G EEx ia/ib IIB/IIC
	Temperature class	T4
	Voltage U_i	9.5 V
	Current I_i	1 A
	Power P_i	9.5 W
Supply		only in connection with the power units RSD2-PSD2-Ex4.34, RSA6-PSD-Ex4.34
External bus
	Voltage	5.4 V
	Current	201 mA
Internal bus		customer specific
Statement of conformity
	Group, category, type of protection, temperature class	II 3D IP54 T 90В°C
Electrical isolation
	Internal/external bus	no electrical isolation
	Internal bus/power supply	safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 60 V
	External bus/power supply	safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 60 V

Назад в раздел