Temperature Converter | RSD-TI2-Ex8

Артикул: RSD-TI2-Ex8
Производитель: Pepperl-Fuchs

8-channel
Inputs EEx ia IIC
Device installation in Zone 1, Zone 2, or Zone 22
Module can be exchanged under voltage in Zone 1 (hot swap)
Connection of resistance thermometers Pt100 or Ni100 in 2-, 3- or 4-wire connection
Connection of thermocouples, type B, E, J, K, L, N, R, S or T
Connection of other resistive sensors, mV sources or thermocouples possible. Linearization adjustable via software
Lead breakage (LB) monitoring for each field circuit
Filter cut-off frequency can be programmed from 0.2 Hz to 10 Hz
EMC acc. to NAMUR NE 21

Datasheet as PDF in following languages:

ENG

DEU

Technical Data: RSD-TI2-Ex8

Supply
Connection		terminals 34, 50 V+; 35, 51 V-
Rated voltage		8.88 ... 9.5 V
Power loss		1.6 W
Power consumption		1.6 W
Internal bus
Connection		backplane bus
Interface		manufacturer specific bus
Cycle time		1.6 ms
Input
Connection		terminals 0+, 1H, 2L, 3-; 4+, 5H, 6L, 7-; 8+, 9H, 10L, 11-; 12+, 13H, 14L, 15-; 17+, 18H, 19L, 20-; 21+, 22H, 23L, 24-; 25+, 26H, 27L, 28-; 29+, 30H, 31L, 32-
Input signal		suitable for: Pt100, Pt200, Ni100, Ni200, Ni120 Minco, Cu10 Minco thermocouples type B, E, J, K, N, R, S, T and mV sources
Lead resistance		max. 10 Ω for each connection
Line fault detection		lead monitoring for all lines and CJC
Transfer characteristics
Resolution		16 Bit
Step response		65 ms (0 ... 90 % of the measured value by smallest filter setting)
Directive conformity
Electromagnetic compatibility
	Directive 2004/108/EC	EN 61326-1:2006
Explosion protection
	Directive 94/9/EC	EN 60079-0:2006, EN 60079-11:2007, EN 60079-26:2004 , EN 61241-0:2006, EN 61241-1:2006
Standard conformity
Insulation coordination		EN 50178
Electrical isolation		EN 60079-11:2007
Electromagnetic compatibility		NE 21:2006
Protection degree		IEC 60529
Climatic conditions		IEC 60721
Ambient conditions
Classification		3K3
Ambient temperature		-20 ... 70 В°C (-4 ... 158 В°F)
Storage temperature		-20 ... 100 В°C (-4 ... 212 В°F)
Relative humidity		95 % non-condensing
Shock resistance		15 g peak, 11 ms period
Vibration resistance		2 g , 10 ... 500 Hz according to IEC 60068-2-6
Damaging gas		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type		Terminals
Core cross-section		max. 2.5 mm²
Protection degree		IP20, for on-site installation a separate housing is required with a minimum of IP54
Mass		approx. 245 g
Mounting		DIN rail mounting
Data for application in connection with Ex-areas
EC-Type Examination Certificate		DMT 98 ATEX E 015 X , for additional certificates see www.pepperl-fuchs.com
	Group, category, type of protection	II (1)2G EEx ia/ib IIB/IIC II (1D)(2D)
	Temperature class	T4
Supply		only in connection with the power units RSD2-PSD2-Ex4.34, RSA6-PSD-Ex4.34
Input
	Voltage	9 V
	Current	38 mA
	Power	86 mW
	External capacitance	4.9 µF
	External inductance	20 mH
	L/R-ratio	0.4 mH/Ω
Internal bus		customer specific
Statement of conformity
	Group, category, type of protection, temperature class	II 3D IP54 T 90В°C
Electrical isolation
	Input/input	no electrical isolation
	Input/power supply	safe electrical isolation acc. to EN 60079-11:2007, voltage peak value 60 V
	Input/Internal Bus	safe electrical isolation acc. to EN 60079-11:2007, voltage peak value 60 V
	Internal bus/power supply	safe electrical isolation acc. to EN 60079-11:2007, voltage peak value 60 V

Назад в раздел