Control interface unit | IVI-KHD2-4HRX DN1

Артикул: IVI-KHD2-4HRX DN1
Производитель: Pepperl-Fuchs

Not available for purchase, If you need assistance please contact us sales@sm-industry.ru
Оборудование снято с производства, для уточнения замены свяжитесь с нами sales@sm-industry.ru

With serial interfaces RS 232, RS 422 or RS 485 as well as TTY selectable
4 read/write heads connectable
3 LEDs as function indicators for each read/write head
Operating modes fixcode, read/write, protocol 3964R selectable with or without interpreter RK512
Specially designed firmware for use with IVI-F47-DN1 DeviceNet bus coupler

Datasheet as PDF in following languages:

ENG

DEU

Technical Data: IVI-KHD2-4HRX DN1

Product Description
Control interface unit with serial interface
General specifications
Description		Special controller for use with DeviceNet adapter, IVI-F47-DN1 Differs from standard controller in that multiple consecutive writes to a tag in front of reader are prevented
Number of read/write heads		max. 4
Indicators/operating means
LED green		read/write head active (4 LEDs, 1 per head)
LED yellow		Code / data carrier detected (4 LEDs, 1 per head)
LED red		reserved (4 LEDs, 1 per head)
LED green 5		Power on
DIP-switch		setting the operating mode and interface
Electrical specifications
Rated operating voltage		18 ... 30 V DC , ripple 10 %_SS
Current consumption		170 mA
Power consumption		4 W
Interface
Physical		RS 232
Protocol		ASCII
Transfer rate		300; 600; 1200; 2400; 4800; 9600; 19200 Bit/s
Ambient conditions
Ambient temperature		-25 ... 70 В°C (-13 ... 158 В°F)
Storage temperature		-25 ... 85 В°C (-13 ... 185 В°F)
Climatic conditions		air humidity max. 75 %
Mechanical specifications
Protection degree		IP20 according to EN 60529
Connection		terminals, max. core cross-section 2 x 2.5 mm², 9-pin Sub-D built-in connector
Material
	Housing	Makrolon 6485
Construction type		K-System, 60 mm (3 TE)

Назад в раздел