| General specifications |
| Signal type | Digital Input |
| Supply |
| Connection | d14+, z14- |
| Rated voltage | 20 ... 30 V DC |
| Ripple | ≤ 10 % |
| Power consumption | approx. 4 W |
| Input |
| Connection | channel 1: d2-, b2+
channel 2: d4-, b2+
channel 3: d6-, b4+
channel 4: d8-, b4+
channel 5: z2-, b6+
channel 6: z4-, b6+
channel 7: z6-, b8+
channel 8: z8-, b8+ |
| Rated values | acc. to EN 60947-5-6 (NAMUR), see system description for electrical data |
| Open circuit voltage/short-circuit current | approx. 7.5 V DC / approx. 7.5 mA |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Line fault detection | breakage I ≤ 0.15 mA , short-circuit I > 6 mA |
| Pulse length/pulse interval | ≥ 1 ms / ≥ 1 ms |
| Output |
| Connection | channel 1: d22, d24
channel 2: d26, d28
channel 3: d30, d32
channel 4: b22, b24
channel 5: b26, b28
channel 6: b30, b32
channel 7: z22, z24
channel 8: z26, z28 |
| Output | signal ; relay |
| Contact loading | 60 V AC/1 A/60 VA; 60 V DC/1 A resistive load/24 W |
| Energized/De-energized delay | 5 ms / 5 ms |
| Mechanical life | 2 x 107 switching cycles |
| Error message output |
| Connection | z30, z32 |
| Output | fault signal ; relay |
| Contact loading | 60 V AC/1 A/60 VA; 60 V DC/1 A resistive load/24 W |
| Energized/De-energized delay | 5 ms / 5 ms |
| Mechanical life | 2 x 107 switching cycles |
| Transfer characteristics |
| Switching frequency | < 10 Hz |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2004/108/EC | The device has been used for the same applications for several years. It therefore features an appropriate electromagnetic field immunity. The device must not be used in new plants. |
| Low voltage | |
| Directive 2006/95/EC | EN 50178:1997 |
| Conformity |
| Insulation coordination | EN 50178 |
| Protection degree | IEC 60529 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
| Protection degree | IP20 |
| Connection | 48-pin plug connector acc. to DIN 41612 , series 2 , type F , z, b and d provided |
| Mass | approx. 175 g |
| Dimensions | 20 x 128 x 193 mm (0.8 x 5 x 7.6 in) |
| Data for application in connection with Ex-areas |
| EC-Type Examination Certificate | PTB 00 ATEX 2207 , for additional certificates see www.pepperl-fuchs.com |
| Group, category, type of protection |  II (1)GD [EEx ia] IIC |
| Input | EEx ia IIC |
| Voltage Uo | 11.8 V |
| Current Io | 14.6 mA |
| Power Po | 43 mW (linear characteristic) |
| Electrical isolation | |
| Input/Output | safe galvanic isolation acc. to EN 50020, voltage peak value 375 V |
| Input/power supply | safe galvanic isolation acc. to EN 50020, voltage peak value 375 V |
| Directive conformity | |
| Directive 94/9/EC | EN 50014:1997, EN 50020:1994 |
