**********************************************************
Description:        TOOLBOX II Version 4
Itemnumber:          S38-100
Revision:             V04.10_SP03

Date of Release:  2010-03-29
**********************************************************



**********************
*--- NEW FEATURES ---* 
**********************

 AU Up-/Download

    Through the Upload function all engineering data of
    an ACP 1703 component can be stored directly in the
    destination system. During loading of the automation
    unit these data are automatically stored on the
    flashcard of the automation unit.
    Later the user can read back these data from the
    destination system into a TOOLBOX II-PC.


***************************
*--- FAULT CORRECTIONS ---*
***************************

1703 GENERAL
------------

* Enhancement PLC-Code for TM 1703 emic
(CHDOC00021790)

Enhancement PLC-Code for TM 1703 emic: old value max. 64kB,
new value 128kB

* Support of TM 1703 mic CPC60 Rev. 21
(CHDOC00008168)

* Support of TM 1703 mic CPC60 Rev. 22
(CHDOC00022258)


Flash-Loader
------------

* Bugfix when firmware loading of several AMIS-DC AUs
(CHDOC00008166)

After selecting and loading of several AUs not all AUs
are displayed in window "PSRII firmware loading: Edit
AUs".


IEC 61850 Read-in SCL files
---------------------------

* Bugfix when generating an ICD-file (GOOSE definition)
(CHDOC00008185)

GOOSE data are exported not correctly for all logical
devices 

* Bugfix when generating an ICD-file (report control
blocks)
(CHDOC00008187)

Amount of report control blocks is not always correct
(default value!).


BC 1703 ACP picture parametrization
-----------------------------------

* Bugfix when transforming BC 1703 ACP
(CHDOC00008172)

Error message when generating assignments for picture
parametrization after installation of service pack 2.

* Bugfix exchange of assignments (picure parametrization,
AU-Copy)
(CHDOC00021879)

Process technical address of image is not correct and
cannot be changed (wizard to exchange assignments of
picture parametrization)

* Bugfix event list/Update TBII V04.10_SP02
(CHDOC00021924)

After updating TBII V04.10_SP02 all messages, which were
used in TBII V04.10_SP01 additionally as events are now
set to "no" instead of "yes" in event list!

* Bugfix in event list view - full texts (index)
(CHDOC00021925)

* BC 1703 ACP Display - suppress event list messages
(CHDOC00022174)

Error description:
From TBII V04.10 SP2 it is possible to activate or
suppress messages in event list display (show yes/no).
After parameter setting "no" these messages are still
activated in event list. When saving, transforming and
comparing with parameter loader all parameter are however
up to date.


CAEx plus
---------

* CAEx plus start problems with a equipped 
 TM 1703 emic/CPC30 AU
(CHDOC00021777)

CAEx plus cannot not be started with more than one
configured TM 1703 emic/CPC30. For each AU an exception
occurs first time of creation in CAEx plus project tree.


OPM II
------

* Bugfix when transforming ET03
(CHDOC00008174)

 Error message when transforming 
 "Missing IED name in system element" and no GOOSE
 parameter setting

* GW-Main exception
(CHDOC00008062)

Bugfix of GW-Main-Exception after different user
interactions

* ICD file generation doesn't work with not configured ET03
on M-CPU
(CHDOC00022159)

ICD-file generation: If ET03 (IEC61850-protocol element -
corresponds to an IED) is configured on C-CPU, generation
doesn't work.
Error message: "no corresponding link images found!".


Data Distribution Center
------------------------

* Exception when importing ranges with identical signal names
(CHDOC00022262)

Exception when importing ranges with identical signal names.
This signals are used already in a different range of the 
process-technical plant.



******************************************
*--- Installation of the service pack ---*
******************************************

The installation is performed by starting 
"4_10_0003.exe" from the root directory of the data 
medium or after download from the corresponding 
directory.

This Service Pack has to be installed on client and 
server.

Note:

When working with network databases (peer server) 
it is necessary to install the same TOOLBOX II-
Version on all clients and the server. (to prevent 
database revisions problems!)

How is it detected whether a service pack has been 
installed?

After the installation of a service pack the 
current service pack number is displayed in the 
tools startup window.